三维激光扫描技术在矿山主溜井测量中的应用

溜井测量具有一定的隐蔽性和不确定性,测量时有相当的危险性,如何对溜井的空间形态特征和冒落状况等进行量化评判,是所有矿山面临的难题。本文介绍了三维激光扫描技术的作业流程,给出了点云数据处理的过程和方法,并以安徽开发矿业有限公司3#主溜井测量为例进行数据采集和处理分析,建立了主溜井的三维立体模型,计算得到了主溜井需要修复的体积,为溜井的安全治理和维修设计提供了可靠的数据依据。实践结果表明了三维激光扫描技术在溜井测量中应用的可行性和优越性。     

A Polyallylamine Anchored Amine‐Rich Laser‐Ablated Graphene Platform for Facile and Highly Selective Electrochemical IgG Biomarker Detection

Current immunosensors have an insufficient number of binding sites for the recognition of biomolecules, which leads to false positive or negative results. In this research, a facile, cost‐effective, disposable, and highly selective electrochemical immunosensing platform is developed based on cationic polyelectrolyte polyallylamine (PAAMI) anchored laser‐ablated graphene (LAG). Here, for the first time, PAAMI is introduced to stabilize LAG flakes, while retaining the intrinsic thermal and electronic properties of the substrate by noncovalent π–π interaction and electrostatic physical absorption. The sensing platform offers a suitable number of anchoring sites for the immobilized antibodies by providing ? NH₂ functional groups. The proper grafting of PAAMI is confirmed through X‐ray photoelectron spectroscopy and Raman spectroscopy. The immunosensing platform is applied to detect immunoglobulin (IgG) biomarkers as a proof of concept. Under optimized conditions, the sensing platform exhibits a linear range of 0.012–15 and 15–352 ng mL^?1 with a limit of detection of 6 pg mL^?1 for IgG detection with high selectivity. Based on the analysis, the developed immunosensing platform can be used for point‐of‐care detection of IgG in clinical diagnostic centers. Furthermore, the developed strategy is well suited for the detection of other cancer biomarkers after immobilizing the relevant antibodies.     

12CrNi3钢外锁止套局部表面激光淬火工艺

利用半导体激光宽带对12CrNi3外锁止套局部进行表面淬火处理,并对处理后的零件进行外观检验、显微组织观察、硬度检测分析和摩擦磨损试验。试验结果表明:采取定光斑方式,激光头到工件表面扫描区域中心点距离375 mm(离焦量为0),工件倾斜22°,激光头倾斜18°,温度1350 ℃,扫描速度9 mm/s,单道扫描后表面平整性最好。表面激光淬火硬化层为750～1000 μm,最浅处为443.1 μm,硬化区组织为极细小马氏体组织,硬度达600～700 HV0.2,是基体硬度的2倍左右, 约为渗碳+淬火态硬度的1.3倍,且相变硬化区耐磨性能明显提高。     

选区激光熔化316L不锈钢的各向组织与性能

对采用选区激光熔化(SLM)制备的316L不锈钢增材制造试样进行了横向、纵向力学性能与微观组织分析。结果表明,增材制造SLM试件亚结构组织由尺寸为0.4 μm左右的胞状组织所构成,组织之间无明显的成分偏析,纵向与横向拉伸强度分别达到808和713 MPa,在经过1050 ℃热处理后,原组织中部分胞状组织消失,纵向及横向强度分别下降到673 MPa及579 MPa,增材制造试样相对传统热轧试样(550 MPa)具有明显的强度优势。SLM试样组织中存在未熔合缺陷,缺陷几何形状的方向性对其在拉应力作用下连接成裂纹有显著影响。热处理后缺陷长度方向与拉伸应力平行的纵向试样伸长率达到47.5%,横向试样伸长率为20%,伸长率指标均显著低于热轧316L钢试样,未熔合缺陷是导致3D打印试件塑性指标降低的主要因素之一。     

激光散射法测定大方无烟煤粒度的测试条件的选择

利用激光粒度分布仪对大方无烟煤进行了测试，目的是为了选取测量过程中最佳测试条件。结果发现测试条件对试验结果的影响较大，特别是分散剂、超声时间、搅拌池泵转速对测试结果的影响尤为显著。最终确定了激光粒度分布仪测试样品的合理测试条件，即分散剂为无水乙醇，无烟煤折射率为1.66，吸收率为0.46，在搅拌池中的超声时间为180 s，搅拌池泵转速为1 600 r·min^-1。另外，取样方法中，试管法和四分法均具有良好的代表性。     

Wide-band,passively Q-switched Yb- and Tm-doped fibre laser using WSSe saturable absorber

A wide-band, passively Q-switched fibre lasers based on ytterbium- and thulium-doped fibre gain medium are proposed and demonstrated. The lasers employ a transition metal dichalcogenide, tungsten sulphoselenide as a saturable absorber (SA) which is prepared by mechanical exfoliation technique. By integrating the SA in the laser cavities, self-starting Q-switched at 1038 and 1982?nm are obtained. The generated pulses exhibit a microsecond pulse duration with few kilohertz repetition rate. The proposed SA has high potential as a new material to cater to the needs of various scientific, industrial and biomedical applications.     

增材制造技术在超高膨胀封隔器中的应用

石油和天然气行业不断关注增材制造技术在航空航天和汽车行业的应用发展。研发了利用增材制造技术的超高膨胀封隔器,该封隔器的支承环系统由增材制造。增材制造设计大幅减少了支承系统的构件数量,同时显著提高了膨胀能力和额定压力。密封元件系统与增材制造支承环安装在一起,提供了极端膨胀比、零挤压间隙和对不规则孔的良好适应性。分析和测试结果表明:直径膨胀比高达111%,与常规封隔器相比,提高50%以上; 至少涵盖5种线重的套管(外径相同); 在148.89 ℃的温度下,密封元件能够保持压力68.95 MPa。介绍了增材制造技术、增材制造支承环概念、增材制造材料力学性能、密封元件系统优化和测试情况,以期给我国的完井作业提供借鉴。     

Void region restriction for additive manufacturing via a diffusion physics approach

A longstanding challenge in additive manufacturing (AM), the presence of void regions in additively manufactured components, causes two main issues: the enclosing of build material powder in powder bed fusion techniques and limiting tool access in critical post-processing operations to remove sacrificial support structures. As topology optimization has embraced and overcome many of the obstacles of incorporating AM constraints into the underlying numerical optimization statement, there exist few solutions that directly address this fundamental void region issue. By developing computationally efficient and effective solutions to this problem, the integration of these two advanced technologies can be fully realized. Drawing on inspiration from the principles of diffusion physics, a particle diffusion void restriction (PDVR) method is presented in this work that is capable of encouraging the optimization scheme to generate final designs that are fully accessible. Additionally, this method empowers the user to choose the type of post-processing method to clear support material (eg, three-axis or five-axis milling operations, number and orientation of part set-ups) and, therefore, quantify the level of costs associated with the post-processing operation. The PDVR optimization framework is demonstrated on multiple two- and three-dimensional test problems, with physically manufactured examples depicting the real-world benefits this method admits.     

Processing of AlSi9Cu3 alloy by selective laser melting

ABSTRACT

Additive manufacturing of Al-alloys allows the production of components with a complicated structured shape, geometry composed by lattice structures, internal cooling, etc. The portfolio of Al-alloys for metal additive manufacturing is still under development and is strongly limited, compared to the conventional technology. The alloy AlSi9Cu3 is used in many applications, but its processing details are still missing. The main aim of this paper is to describe the laser process parameters for AlSi9Cu3, processed by SLM technology and manufactured from two powders of different shapes and particle sizes. The tested process parameters were laser power, laser speed, and hatch distance in the range of 100–400?W, 200–1500?mm?·?s^?1 and 90–150?µm. These were tested using a single-track and cube test. Microstructure, mechanical properties and the fatigue of SLM samples were analysed and compared with as-casted material.     

Pure CuBi2O4 Photoelectrodes with Increased Stability by Rapid Thermal Processing of Bi2O3/CuO Grown by Pulsed Laser Deposition

A new method for enhancing the charge separation and photo‐electrochemical stability of CuBi₂O₄ photoelectrodes by sequentially depositing Bi₂O₃ and CuO layers on fluorine‐doped tin oxide substrates with pulsed laser deposition (PLD), followed by rapid thermal processing (RTP), resulting in phase‐pure, highly crystalline films after 10 min at 650 °C, is reported. Conventional furnace annealing of similar films for 72 h at 500 °C do not result in phase‐pure CuBi₂O₄. The combined PLD and RTP approach allow excellent control of the Bi:Cu stoichiometry and results in photoelectrodes with superior electronic properties compared to photoelectrodes fabricated through spray pyrolysis. The low photocurrents of the CuBi₂O₄ photocathodes fabricated through PLD/RTP in this study are primarily attributed to their low specific surface area, lack of CuO impurities, and limited, slow charge transport in the undoped films. Bare (without protection layers) CuBi₂O₄ photoelectrodes made with PLD/RTP shows a photocurrent decrease of only 26% after 5 h, which represents the highest stability reported to date for this material. The PLD/RTP fabrication approach offers new possibilities of fabricating complex metal oxides photoelectrodes with a high degree of crystallinity and good electronic properties at higher temperatures than the thermal stability of glass‐based transparent conductive substrates would allow.